24V 5m IP20 2216 White LED Strip - 300/m

DeLight LED presents this quality LED strip light by CDNLUX. 

Affordable LED lighting does not have to be low quality LED Lighting. This 24V, 2216 High Density LED Strip will deliver great ambient lighting at an incredible price. Offered in 3 types of Warm White (2700K, 3000K ,3500K), Natural White (4000-4500K), Cool White (5000K), it’s perfect to highlight crown moldings and bring a classy accent lighting to any room.

This LED Strip features 300 2216 LED Chips (2.2mm x 1.6mm) per meter over a 5m roll. These Chips give a 120-degree light beam and a light output of 1450 lumens per meter. Rated at iP20, this LED UL Listed Strip offers no protection from water and dust.

Your LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces. For porous surfaces we suggest using the Double Sided 3M Acrylic Tape for LED Strips.

This Single Color 24V Led Strip is cULus Listed. This means that is has been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that it will pass the toughest building inspections both in Canada and the USA.

This LED strip uses a custom high quality 3OZ PCB (Printed Circuit Board) to ensure a consistent brightness throughout the 24V Strip. Unlike cheaper strips that can be found on the market, this LED Strip will allow you to connect to 10 meters in series without losing brightness.

Forecast a power supply at 24VDC of 19W per meter for your installation (95W for the complete Strip). Consult our page about power supplies to know more about the required power for your LED strip and to see our line of available power supplies.

This LED strip comes in a 5m spool and is equipped with 2-wire connection on one end and another 2-wire connection on the other end. The two-wire connection is used to connect two strips together or to hook up your Strip to a hard-wired power supply. 

You can customize your LED Lighting set up as this Strip can be cut every 6 LEDS. The 5m 2216 Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend that  you solder 2 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss. Quick connectors are available and are only recommended if you have 1 or 2 connections to make. Should you want to use a connector, use an iP20 grip and clip connector while making sure the remove both the top and bottom silicone of the Strip.

The 300 LEDs 24V 2216 iP20 Single Color LED Strip is fully dimmable. You can either dim it through a remote control or a wall panel with one of our low voltage dimmers or you can dim it using an LED compatible wall dimmer when combined with one of our dimmable power supplies.